3M Bondo 2PC SELF ADHESIVE BODY PATCH 932 STAGE-2 Reinforced Mesh Rust-Resistant

Description

3M
bondo
2-PIECES
SELF ADHESIVE BODY PATCH
STAGE-2
100% BRAND NEW
Model: 932
Available Size: 2-PIECES: 5.9 IN x 5.8 IN | 15 CM x 14 CM EACH
FOR LARGE RUST-OUTS AND DAMAGED AREAS
CREATES REINFORCED FOUNDATION FOR BODY FILLER REPAIR
Make patchwork easier with Bondo Self Adhesive Body Patch on hand. When you're filling in rust patches on auto bodies, Bondo is the ultimate go-to for lasting results. 3M Bondo 932 body patches make DIY repairs last even longer. The special screen provides a firm, metal reinforced contour foundation for Bondo body filler and fiberglass resins when applied directly over the patched area. The flexible patches can be cut, folded and shaped for effective placement; rust and weather resistant double-sided adhesive makes affixing a breeze.
• Reinforced mesh provides supportive backing to fill holes
• Patch material may be cut, folded and shaped for most contours
• Use with Bondo Body Filler and fiberglass resins
• Self-adhesive holds body patch in place
• Rust-resistant properties create a lasting repair
• Can be shaped to any contour on your car, truck or van
Reinforced Auto Body Repairs
When damage or rust is extensive, Bondo Self Adhesive Body Patch provides a sturdy reinforced foundation on which you can apply Bondo Body Filler and fiberglass resins. The metal mesh creates a base to provide additional support where needed. The mesh patch comes with a two-sided self-adhesive tape that sticks to metal, fiberglass and other surfaces.
Shapes to the Contour of Your Vehicle
Bondo Self Adhesive Body Patch makes it easy to repair rusted out areas because it can be shaped to any contour on your car, truck or van. The mesh can be positioned so that it lays level with the contour of the repair area. Our automotive body patch may be cut to customized sizes with a scissors or tin snip.
A Sturdy Lasting Repair
Using our body patch creates a sturdy repair that will not rust. The body patch is advised for vehicles that are mechanically sound but are showing signs of rust and corrosion. Fixing the body with this material helps restore the appearance of the vehicle and potentially extend its service life.
Instructions:
1. Clean area with 80 grit sandpaper and if necessary a 3M Paint and Rust stripper, removing any rust and all loose or cracked paint. Be sure area to be covered is clean and dry before applying the patch.
2. Cut patch to size with household scissors. Shape and contour patch to area. Do not remove backing until you have finished sizing and shaping patch. Body patch can be applied either inside or outside repair area.
3. Start along edge and carefully peel backing paper to expose the high strength adhesive film. Press patch firmly into place.
4. Use Bondo Body Filler to complete the repair (Bondo automotive body filler is sold separately).