Car Paintless Dent Repair Puller Remover Lifter Dint Hail Damage 30 Tab Tool Kit

Description

Car Paintless Dent Repair Puller Remover Lifter Dint Hail Damage 30 Tab Tool Kit
About Metal Dent Lifter:
1.Aluminum body
2. Stainless Steel Adjustment knob
3.Stainless Steel Nuts/Bolts/Pivot pin/E-Retaining clips
4. One screw on the top of the dent lifter is used to adjust the middle height of the dent lifter.
5. With sandblasting oxidation process, the smooth texture feels and outstanding looks, The product is very strong and durable.
6. On the bottom of the dent lifter is silicone, not ordinary rubber, which is very soft and not harmful for oil paint and can be torn down.
Note:
1. Use adjustable lifting-mode movable tripod puller and adjust it against the size of the dent.
2.During operation, you need to adjust your force gradually until the position where the dent is located is pulled to the flat and recovered entirely.
3. The Dent Lifter squeeze trigger will allow you to control and massage door dings and hail damage until the desired results are achieved.
4.New material and new design, stronger material.
Specifications
Material:
strengthen plastic
About Different Sizes Glue Puller Tabs
Features:
1. Different tabs for different dent lifter or the Slide Hammer, Works with All Glue Pullers
2. Unique small pits design, fit for Auto Body Dent Repair, this special face can bond the glue well, also clean it easily, the size can match perfectly with dent puller/lifter
3. Durable design allows for perfect placement and superior adherent properties
Hot Melt Glue Sticks
Features:
√ Softening Point: 178°F. (81°C.)
√ Working Time: 40 seconds
√ Viscosity / Centipoises: 5,500 @ 380°F. (193°C.) 12,000 @ 356°F. (180°C.)
√ Temperature of Glue Gun: High Temperature
√ Shape: Round
Warm Prompt:
1. Keep clean of the glue sticks to avoid impurity block the nozzle, and do not pull out of the remanent glue sticks after each time using.
2. To avoid get an electric shock during use, do not use it in a humid environment and keep it away from children.
3. The remaining pressure inside the glue gun will push a little molten glue out of the gun even stop use, so to save your glue, please control release the trigger or cut off the power in advance.
4. Cut off the power when stop using, and never try to disassemble the melt glue gun in any case.
Package Include:
1 x Dent Lifter (No adhesive pads)
1 x Glue gun
1 x Scraper
1 x Instructions Book
18 x Car Dent Repair Tabs  Print Tabs With different style
10 x Mini Glue Sticks
How to use?
Step 1: Confirm the dent.
Step 2: Paste melt glue into the surface of puller tab.
Step 3: Press glue tab into the dent tightly (just wait for 3-5 minutes).
Step 4: Use Golden Metal Dent Lifter to pull this glue tab out lightly.
Step 5: Spray alcohol and use plastic shovel to clean melt glue.
Step 6: Check it OK.