New 13598787 TPMS Tire Pressure Sensor For GM Cadillac ATS CTS 433MHz Set of (4)

Description

New 13598787 TPMS Tire Pressure Sensor For GM Cadillac ATS CTS 433MHz Set of (4)
Note1:
Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.
Note2:
【No sensor programming Required】
: The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle.
Simplified Relearn :
Trigger Required VERSION.
Installation of TPMS is recommended to be performed only by trained professionals.
SPECIFICATION :
Manufacture Part Number ：
13598787
Battery Life:
ABOUT 5YEAR
Operating Frequency:
433MHz
PACKAGE CONTENT :
4PCS TPMS SENSOR
COMPREHENSIVE VEHICLE COVERAGE
For
2019 Cadillac ATS Base, Luxury, Premium Luxury, Premium Performance, V 2.0L L4 - Gas, 3.6L V6 - Gas
2018 Cadillac ATS Base, Luxury, Premium Luxury, Premium Performance, V 2.0L L4 - Gas, 3.6L V6 - Gas
2017 Cadillac ATS Base, Luxury, Premium Performance, V 2.0L L4 - Gas, 3.6L V6 - Gas
2016 Cadillac ATS Base, Luxury, Performance, Premium, V 2.0L L4 - Gas, 2.5L L4 - Gas, 3.6L V6 - Gas
2018 Cadillac CTS Base, Luxury, Premium Luxury, Vsport, Vsport Premium Luxury 2.0L L4 - Gas, 3.6L V6 - Gas
2017 Cadillac CTS Base, Luxury, Premium Luxury, V, Vsport, Vsport Premium Luxury 2.0L L4 - Gas, 3.6L V6 - Gas, 6.2L V8 - Gas
2016 Cadillac CTS Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium 2.0L L4 - Gas, 3.6L V6 - Gas, 6.2L V8 - Gas
2020 Chevrolet Camaro LS, LT, SS, ZL1 2.0L L4 - Gas, 3.6L V6 - Gas, 6.2L V8 - Gas
2019 Chevrolet Camaro LS, LT, SS, ZL1 2.0L L4 - Gas, 3.6L V6 - Gas, 6.2L V8 - Gas
2018 Chevrolet Camaro LS, LT, SS, ZL1 2.0L L4 - Gas, 3.6L V6 - Gas, 6.2L V8 - Gas
2017 Chevrolet Camaro LS, LT, SS, ZL1 2.0L L4 - Gas, 3.6L V6 - Gas, 6.2L V8 - Gas
2016 Chevrolet Camaro LT, SS 2.0L L4 - Gas, 3.6L V6 - Gas, 6.2L V8 - Gas
Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.