Paintless Dent Repair Dent Puller ​Tools Kit Metal Dent Lifter Dent Removal

Description

what you got,depends on the model selected.model listed below,please check it.
Paintless Dent Removal Tool Kit:
Description
AUTO BOAY PAINTLESS DENT REMOVAL TOOLS KIT
Why not save the money for dent repair to buy one bottle of your beloved wine, or enjoy a sunshine travel?
One of the most annoying and frustrating things is when you find a dent on your beloved car. Sadly, some drivers will just drive off and never say sorry! Even if the driver leaves contact details, there can be a lot of frustration dealing with body shops and insurers.
No more waiting!
No more paying for the body shop repairs!
Paintless Dent Repair Tools
are the new products, for removing most minor, and/or even some major dents, without repainting the vehicle and damaging the factory finish.
The Paintless Dent Removal process is 100% environmental friendly.
¨C As of no chemicals are used, so there are no toxins being released into the environment.
¨C The work is only carried out on panels, which can be repaired by Paintless dent removal.
¨C The Dent repair process involves manually massaging the dent from behind using hand tools where no electricity is needed.
what's in the package:
1 x Bridge Dent Puller
10 x Red Puller Tabs
5 x Blue Puller Tabs
1 x 100W Hot Melt Glue Gun
5 x Yellow Pro Glue Sticks
5 x Black Pro Glue Sticks
1 x Rubber Scraper
Aluminium Pads ONLY:
Product features:
1 It has the advantages of simple operation, repair the dent for you directly.
2 Environmental protectionit and it does not damage the original paint.
3 It is suitable for the dent of all kinds of flat metal ,such as the surface of automobile metal
How to use this paintless dent repair kits?
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue
gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be
applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the
glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10
minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod
backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
what's in the package:
8pcs x  Silver Puller Tabs
Glue Gun ONLY:
what's in the package:
1 x 100W Hot Melt Glue Gun